TIG Tickets sculpture kits are DIY welding projects made from precision laser-cut steel.

Each kit arrives as flat steel parts with numbered pieces and marked fold lines to guide you through the build.

Fold the parts into shape, tack them together following the step-by-step assembly guide, then weld and finish it however you like.

You end up with a full 3D steel sculpture that you built yourself.

TIG, MIG or stick — whatever you’re most comfortable with.

The kits are made from 1.6mm mild steel, so you definitely don’t need a TIG just because we’re called TIG TICKETS.

Most of the build is simply folding the parts, tacking everything together, then going back and finishing your welds.

No
Nothing fancy.

The parts are designed to be folded by hand with basic workshop tools. A vice, pliers and a hammer will get you through most of it — no brake press needed.

You’ll also need your welder and the usual gear you’d have around the shed.

Everything you need to build the sculpture itself.

You’ll get all the laser-cut 1.6mm mild steel parts, with each piece numbered and the fold lines marked.

You’ll also get the fold diagrams and step-by-step assembly instructions showing you how it all goes together.

Just bring the welder and get building.

It depends on the kit and how you like to work, but these aren’t designed to be knocked over in an hour.

They’re proper welding projects made to give you a good few sessions in the shed.

Take your time with the folds and fit-up, tack everything together, then come back and finish your welds. The build is half the fun.

Give us a shout.

Between the numbered parts, fold diagrams and assembly instructions, you should have everything you need to get through the build.

But if something doesn’t look right or you get stuck on a section, send us a message and we’ll help you out.

That’s part of the process.

These kits are designed for practice, so mistakes are expected.

Grind it back, adjust your settings, and go again.

Every weld is another rep.